Solutions: Wavlink Extender Not Working (2025)
The Wavlink extender is one of the small networking devices that you can connect with the home router. User can face issues like Wavlink Extender not working. Worry not, you can solve it with the help of the solutions given below:
Solution1: Power Connections
You should make sure that the power wall socket are in good condition and are not damaged, where you have been power the extender. Also, check the Ethernet cable (if used) connected to the extender and router. If it is cut or damage, then replace it.
Solution2: Router Connection
The extender connects to the router with the help of the WPS button. But, you can easily link with the LAN cable. You should check that the devices are connected or not. If the WPS button is not working, then you can built Ethernet cable network and establish Wavlink setup with the home router.
There are easy steps to do that:
- Plug the cable one end to the router LAN port.
- Plug the other end to the extender Ethernet port.
- Then, you can turn on the router and extender and configure the settings.
Solution3: Optimal Locations
Wavlink Extender and router location must place on the optimal location in your house. It should be far from the electronic devices like microphones and microwave ovens. The reason behind it is electromagnetic waves. The waves can interrupt the internet and network signals of the networking devices (any).
Solution4: Reboot WiFi Network
Refreshing the WiFi connections should be the first choice of solution. To restart the devices, you have to power off and on extender and connected router to it. You can do it using the power button and pulling out the device power cord from the wall outlet.
Solution5: Reset Wavlink Extender
The last option of fix is resetting the Wavlink extender network. To reset the router and satellites, you have to use the sharp object and press the RESET button on the back of the devices. Hold it for 10 seconds and release it to start the reset process.
The process will end in minutes and then you have to configure the network again by using the computer or the Wavlink app or the IP address 192.168.10.1.
All these solutions are also applicable to the Wavlink AC1200 setup.
Conclusion
From the post, you have seen and learned about how to solve the Wavlink extender not working issue using some solutions.