Wavlink WiFi Extender Setup via Ap.setup

Wavlink provides extenders and routers to the internet users. In this post, you will get to know about how to finish the Wavlink WiFi extender setup via ap.setup and default IP address 192.168.10.1. So, let’s start the Wavlink setup:

Wavlink WiFi Extender Setup

Wavlink extender is a direct plug-in device. There is no power cord or adapter in the content package of the device. To start the setup, you must connect the extender to the router.

WPS Method

• Turn on the extender and press the WPS button on the router as well as the extender.
• In few seconds, the extender will connect to the router and set as default settings.

Note: If you want to adjust the settings from the interface according to the area of house.

Cable Method 

• There is one more ways to connect the extender to router via cable.
• On extender you will find a port, use the Ethernet cable and plug it in the port.
• The other end will go into the main router LAN port.

Note: Make sure the Ethernet cable is not damaged and cable is connected tightly.

Wavlink WiFi Extender Login (Ap.setup)

Now, you must learn how to log in to the interface GUI window in your computer or laptop. So, connect your internet device to the Wavlink extender and follow these below steps.

1. Open any browser and search the URL ap.setup in it.
2. A login page will appear on the screen.
3. To access the GUI, you have to enter the username and password.
4. The admin details are given on the user manual or on the extender label.
5. Enter and click LOGIN to access the interface window.
6. Here, you can complete the Wavlink WiFi extender setup.

Wavlink WiFi Extender Login (192.168.10.1)

There is another way to log into the interface window via your extender default IP address. Apply these steps to get to the GUI window via IP.

1. Connect computer, open browser and search the default IP address 192.168.10.1.
2. You will reach to the Wavlink interface login page.
3. Here, enter the admin username and password to go further.
4. Click on the LOGIN button and you’ll access interface window.

So these were step-by-step instructions to finish the Wavlink WiFi extender setup with the help interface as well as WPS connection method.